Toshiba e-studio 2555c Troubleshooting Manual page 27

1.TROUBLESHOOTING FOR THE HARDWARE
2
Open the transport guide holding the green knob and
then release the misfed paper. Pull the misfed paper
up or down as shown in the illustrations depending
on the position of the paper.
Pulling it up
Pulling it down
3
Remove the paper from the exit section.
4
When the finisher is installed, open the Bridge Kit
cover while holding the handle.
5
Remove the misfed paper.
1 TROUBLESHOOTING FOR THE HARDWARE
3
2
Clearing a Paper Misfeed
1
25