Toshiba e-studio 2555c Troubleshooting Manual page 67

1.TROUBLESHOOTING FOR THE HARDWARE
4
After the transparent cover is lifted, take the empty
staple case out of the cartridge.
5
Fit the new staple case into the staple cartridge.
Insert it to the rear until it clicks.
In this step, do not remove the seal bundling the staples.
6
Press down the transparent cover of the cartridge.
Press it down until it clicks.
7
Pull out straight the seal bundling the staples.
8
Fit the staple cartridge.
Insert the cartridge until it is caught by the latch of the staple
cartridge and is fixed with a click.
1 TROUBLESHOOTING FOR THE HARDWARE
1
2 2
1 1
Refilling With Staples
2
65