Cleaning The Hole Punch Dust Bin; Hole Punch Unit Mj-6103; Hole Punch Unit Mj-6007 - Toshiba e-STUDIO 206L Troubleshooting Manual

Cleaning the Hole Punch Dust Bin

When the hole punch dust bin becomes full, dispose of the paper punchings following the procedure below.
 Hole Punch Unit MJ-6103
Open the Hole Punch Unit cover.
1
2 Pull out the hole punch dust bin.
3 Dispose of the paper punchings.
Push back in the hole punch dust bin.
4
5 Close the Hole Punch Unit cover.
 Hole Punch Unit MJ-6007
1 Lift up the control panel and then open the front cover
of the finisher.
While holding the green lever, move the finisher to the
2
left until it stops.
1 TROUBLESHOOTING FOR THE HARDWARE
2

Cleaning the Hole Punch Dust Bin

1
2
1
77