1 TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Hole Punch Dust Bin
When the hole punch dust bin becomes full, dispose of the paper punchings following the procedure below.
Finisher / Saddle Stitch Finisher Hole Punch Unit
Open the Hole Punch Unit cover.
1
2
Pull out the hole punch dust bin.
3
Dispose of the paper punchings.
Push back in the hole punch dust bin.
4
5
Close the Hole Punch Unit cover.
Inner Finisher Hole Punch Unit
1
Lift up the control panel and then open the front cover
of the finisher.
While holding the green lever, move the finisher to the
2
left until it stops.
68
Cleaning the Hole Punch Dust Bin
1
2
2
1