Function Setting - Mitsubishi Electric Mr.Slim PAR-30MAA Technical Manual

Function Setting

Button operation
[ 1 ]
S e v r c i e m e
Test run
Input maintenance info.
Function setting
Check
Self check
M a n i m e n : u
C u s r r o
[ 2 ]
Function setting
Ref. address
Unit No.
Grp./1/2/3/4/All
Monitor:
Cursor
[ 3 ]
Function setting
Ref. address
Mode 1
Mode 2
Mode 3
Mode 4
Request:
Cursor
[ 4 ]
Function setting
Ref. address
Mode 1
Mode 2
Mode 3
Mode 4
Request:
Cursor
58
Select "Service" from the Main menu (refer to page 17), and press the
n u
button.
Select "Function setting" with the F1 or F2 button, and press the
button.
Set the indoor unit refrigerant addresses and unit numbers with the F1
through F buttons, and then press the
setting.
<Checking the indoor unit No.>
Address
When the
If the unit is common or when running all units, all indoor units for the selected
refrigerant address will start fan operation.
When data collection from the indoor units is completed, the current settings ap-
pears highlighted.
Grp.
Non-highlighted items indicate that no function settings are made.
Screen appearance varies depending on the "Unit No." setting.
Cursor
Use the F1 or F2 button to move the cursor to select the mode number,
Unit #1
and change the setting number with the F3 or F button.
Cursor
Service
button is pressed, the target indoor unit will start fan operation.
Main
Mr.Slim
OFF
Only
Sub
button to confirm the current