Function Setting - Mitsubishi Electric PAR-W31MAA Instruction Book

Function setting

▌
Function description
Sets the functions for each connected unit from the remote controller as required.
• Refer to the Installation Manual for the connected units for details on the connected unit settings at
shipment, Function No. and the Data.
• If the function settings change the connected unit functions, all the settings must be managed
appropriately, such as by writing them down on paper.
Button operation
1
Unit1
F1
2
Unit1
Press +/- to set password
F1
34
FRI
Service
F2 F3 F4
FRI
Password input
F2 F3 F4
Select "Service" from the Main menu (refer to
page 20), and press the [Select] button.
A password input screen will be displayed.
Enter the current maintenance password (a
4-digit number).
After entering the 4-digit password, press the
[Select] button.
If the password is correct, the Service menu
will be displayed.
P
OFF