Controller operation-Function settings
Function setting (City Multi)
Make the indoor units' function settings from the remote controller as necessary.
The following settings should be made only for City Multi units and as necessary.
Refer to the Installation Manual for how to make the settings for Mr. Slim units.
Refer to the indoor unit Installation Manual for information about the factory settings of indoor units,
function setting numbers, and setting values.
When changing the indoor units' function settings, record all the changes made to keep track of the
Remote controller check
Select Service on the Main menu (see page 20),
and press the SELECT button.
Select Function Setting on the Service Menu
screen, and press the SELECT button.