Mitsubishi Electric Mr.Slim PAR-30MAA Technical Manual page 43

[ 4 ]
[MITSUBISHI] rogo
Manual vane angle
Select:
Outlet Angle
Manual vane angle
Setting
The current vane setting will appear.
Select the desired outlets from 1 through 4 with th F1 or F2 button.
• Outlet: "1," "2," "3," "," and "1, 2, 3, , (all outlets)"
Press the F3 or F button to go through the option in the order of "No
setting (reset)," "Step 1," "Step 2," "Step 3," "Step 4," and "Step 5."
Select the desired setting.
<Vane setting>
No setting
Step 3
All outlets
Press the button to save the settings.
A screen will appear that indicates the setting information is being transmitted.
The setting changes will be made to the selected outlet.
The screen will automatically return to the one shown above (step ) when the
transmission is completed.
Make the settings for other outlets, following the same procedures.
If all outlets are selected,
goes into operation.
Navigating through the screens
• To go back to the Main menu ..................
• To return to the previous screen ..............
Step 1 Step 2
Step 4 Step 5
will be displayed the next time the unit
button
button
3