Product Features - Mitsubishi Electric Mr.Slim PAR-30MAA Technical Manual

Product Features

Ideal remote controller in pursuit
of easy operation, convenience,
and energy saving.
EASY OPERATION
Backlit LCD (Liquid Crystal Display)
Full dot backlit LCD makes it easy to see and control units.
Large, easy-to-see display
Feature
1
Full-dot LCD display with large characters for easy viewingContrast also adjustable.
Simple button arrangement
Feature
2
Buttons are arranged according to usage to allow for intuitive navigation.
Frequently used buttons are larger than other buttons to prevent unintended.
CONVENIENCE
Night Setback
To prevent indoor dew or excessive temperature rise, this control starts heating operation when the control
object group is stopped and the room temperature drops below the preset lower limit temperature. Also, this
control starts cooling operation when the control object group is stopped and the room temperature rises
above the preset upper limit temperature.
Heating
Room temp.
21°C
Heating
ON
Heating
OFF
Lower limit temp.
12°C
Night setback operation
Setback control time
ENERGY SAVING
Auto Return
This function helps to maintain the indoor temperature at the required level. Even if the temperature setting is
changed during operation, the set temperature automatically returns to the originally preset temperature after
certain amount of time. It is possible to set the required temperature for limited time (30-120 min. in 10-minute
increments).
<Sample screens when the Auto return function is enabled>
Example: Lower the Set temp. to 24°C. 60 minutes later, the Set temp. will be back to 28°C.
Cool Set temp.
Mode Temp.
6
Setback operation
stops
-when the indoor
temperature rises 3°C
above the lower limit
Setback operation starts
OR
when the indoor
-when the control time
temperature drops below
is over
the lower limit during
setback control time.
Fri
Auto Cool Set temp.
Fan Mode Temp.
Feature
1
Cool
Mode
Cooling
Upper limit temp.
28°C
Cooling
OFF
Cooling
ON
Room temp.
24°C
60 minutes later
Fri
Auto Cool
The Set temp. is
changed from 28ºC
Fan Mode
to 24ºC by a user.
Set temp. Auto
Temp. Fan
Night setback operation
Setback operation stops
Setback operation starts
-when the temperature
when the temperature
drops -3°C below the
exceeds the upper limit
upper limit
during setback control time.
OR
-when the control time is
over
Setback control time
Fri
Set temp. Auto
60 minutes later,
the Set temp.
returns to 28ºC
Temp. Fan
automatically.
Feature
2