Auto mode setting
Whether to use or not use the Auto mode can be set.
Button operation
[ 1 ]
Initial setting menu
Auto mode
Administrator password
Language selection
Main menu:
Cursor
[ 2 ]
Auto mode
Auto mode
Yes
Select:
50
Select "Initial setting" from the Main menu (refer to page 17), and press the
button.
Move the cursor to the "Auto mode" with the F1 or F2 button, and press
the
Page
Change the setting with the F3 or F button.
/ No
Press the
Auto mode setting : The factory default setting is "Yes".
Cursor
• Yes:
• No:
button.
button to save the changes mode.
The AUTO mode can be selected in the operation mode setting.
The AUTO mode cannot be selected in the operation mode setting.
Navigating through the screens
• To go back to the Main menu ..................
• To return to the previous screen ..............
Main
Sub
button
button