Mitsubishi Electric Mr.Slim PAR-30MAA Technical Manual page 66

Check
Smooth maintenance
Maintenance data, such as the indoor/outdoor unit's heat exchanger temperature and compressor operation current can be
displayed with "Smooth maintenance".
* This cannot be executed during test operation.
* Depending on the combination with the outdoor unit, this may not be supported by some models.
Button operation
[ 1 ]
Check menu
Error history
Refrigerant volume check
Refrigerant leak check
Smooth maintenance
Request code
Service menu:
Cursor
[ 2 ]
Smooth maintenance
Ref.address
Stable mode
Cool
Begin:
Cursor
Smooth maintenance
Ref.address
Stable mode Cool
Stabilization→Collecting
Exit:
[ 3 ]
Smooth maintenance
Cool
Ref. address
COMP. current
COMP. run time
COMP. On / Off
COMP. frequency
Return:
Page
Smooth maintenance
Cool
Ref.address
Sub cool
OU TH4 temp.
OU TH6 temp.
OU TH7 temp.
Return:
Page
Smooth maintenance
Cool
Ref.address
IU air temp.
IU HEX temp.
IU filter time
Return:
Page
66
Select "Service" from the Main menu (refer to page 17), and press the
button.
Select "Check" with the F1 or F2 button, and press the
Select "Smooth maintenance" with the F1 or F2 button, and press the
button.
Set each item.
Select the item to be changed with the F1 or F2 button.
/ Heat/ Normal
Select the required setting with the F3 or F button.
Address
■ <Ref.address>setting [ 0 ]~[ 15 ]
■ <Stable mode>setting [ Cool ] / [ Heat ] / [ Normal ]
Press the
/ Heat/ Normal
* Stable mode will take approx. 20 minutes.
The operation data will appear.
A The Compressor-Accumulated operating (COMP. run) time is 10-hour unit,
Hr
and the Compressor-Number of operation times (COMP. On / Off) is a
times
100-time unit (fractions discarded).
Hz
Hr
button, Fixed operation will start.
Navigating through the screens
• To go back to the Main menu ..........
• To return to the previous screen .......
Service
Mr.Slim
Main
Only
button.
button
button