Test Run - Mitsubishi Electric Mr.Slim PAR-30MAA Technical Manual

Test run

Refer to the indoor unit Installation Manual for how to make the settings.
Button operation
[ 1 ]
S e v r c i e m e
Test run
Input maintenance info.
Function setting
Check
Self check
M a n i m e n : u
C u s r r o
[ 2 ]
Test run menu
Test run
Drain pump test run
Service menu:
Cursor
Test run
Pipe
Cool
Switch disp.
Mode
Vane
5
Select "Service" from the Main menu (refer to page 17), and press the
n u
button.
Select "Test run" with the F1 or F2 button, and press the
Select "Test run" with the F1 or F2 button, and press the
Test run operation
Remain
Press the F1 button to go through the operation modes in the order of
"Cool and Heat".
Auto
Cool mode: Check the cold air blow off.
Fan
Heat mode: Check the heat blow off.
Press the
Auto vane check
Remain
Check the auto vane with the F1
* Check the operation of the outdoor unit's fan.
Press the
Press the
When the test run is completed, the "Test run menu" screen will appear.
* The test run will automatically stop after two hours.
button and open the Vane setting screen.
F2 buttons.
button to return to "Test run operation".
button.
Service
Main
Sub
button.
button.