Controller operation : Function settings
• ON / OFF and temperature setting can be scheduled for each day.
• "Weekly timer" is not executed when the On / Off timer is enabled.
[ 1 ]
OU silent mode
[ 2 ]
Tue Wed Thu Fri Sat Sun
[ 3 ]
Weekly timer No /
Select "Weekly timer" from the Main menu (refer to page 17), and press the
The Weekly timer will not work in the following cases:
when the On / Off timer is enabled, when the weekly timer is disabled, during
an error, during check (in the service menu), during test run, during remote
controller diagnosis, when the clock is not set, during Function setting, when
the system is centrally controlled (On / Off operation or temperature setting
from local controller is prohibited).
The current settings will appear.
Press the F1 or F2 button to see the settings for each day of the week.
Press the F button to see patterns 5 through 8.
Administrator passwaord setting. (Refer to page 51)
The screen to enable (Yes) and disable (No) the weekly timer will appear.
To enable the setting, move the cursor to "Yes" with the F3 or F button,
and press the
button to go to the setting screen.