Ip Settings; Wireless - LevelOne WAP-3101 User Manual

WAP-3101 Ceiling Mount PoE Wireless AP

Operation Mode: Select Access Point or Repeater radio button. In order to
configure the Repeater, click on the WDS Link Settings under the Wireless drop-
down menu.

Click on the Apply button to save the changes.

IP Settings


IP Settings page
The
or a DHCP client.

IP Network Setting: Select Obtain an IP address automatically (DHCP) radio
button if the Access Point is connected to a DHCP server. This will allow the Access
Point to pass IP addresses to the clients associated with it. You may select Specify
an IP Address radio button if you would like the device to use a static IP address. In
this case, you would be required to specify an IP address, subnet mask, and default
gateway IP address.

IP Address: Specify an IP address

IP Subnet Mask: Specify the subnet mask for the IP address

Default Gateway: Specify the IP address of the default gateway.

Click on the Apply button to save the changes.

Wireless

allows you to configure the device with a static IP address

Click on the Wireless link on the
navigation drop-down menu. You will then
see
wireless MAC filter, WDS link settings, and
wireless advanced settings. Each option is
described below.
four options: wireless network,
15