Wireless Security Settings; Data Encryption And Authentication Settings; Figure 28 Security Settings - LevelOne WAB-5120 User Manual

Wireless Security Settings

To prevent unauthorized radios from accessing data transmitting over the connectivity, the WAB-5120
300Mbps 5G Wireless Outdoor PoE Access Point/Bridge provides you with rock solid security settings.

Data Encryption and Authentication Settings

Open "Profile Setting" in "Wireless" and enter "VAP Profile 1 Settings" as below.
Network Authentication
Open System: It allows any device to join the network without performing any security check.
Shared Key: Data encryption and key are required for wireless authentication. (not available in
Bridge/AP Repeater mode)
Legacy 802.1x: Available in AP/Wireless Client mode, it provides the rights to access the wireless
network and wired Ethernet. With User and PC identity, centralized authentication as well as
dynamic key management, it controls the security risk of wireless network to the lowest. To serve
the 802.1x, at least one EAP type should be supported by the RADIUS Server, AP and wireless
client.
Note:
For first time users, if EAP type "TLS" is selected, you need to import valid user
certificate given by CA in prior. To import user certificates, please refer to Chapter 5

Figure 28 Security Settings