Cradle Leds; Docked Led; Spare Battery Led; Mx8 Mobile Device System Status Led - Honeywell MX8 User Manual

Cradle LEDs

When the desktop cradle AC/DC power supply cable begins to supply power to the cradle, the cradle LEDs flash yellow,
red, green for three seconds then turn off. The cradle is ready for use.

Docked LED

When Docked LED is ...
Off
Red
The cradle must be connected to a power source.

Spare Battery LED

When Spare LED is ...
Off
Green
Red
Yellow / Amber
Flashing Red
The cradle must be connected to AC power. Spare battery charging does not require an MX8 be docked in the docking
bay.

MX8 Mobile Device System Status LED

The MX8 System Status LED is located at the top of the keypad.
When the LED is . . .
Blinking Red
Steady Red
Blinking Green
No Color
12 - 6
It means ....
MX8 not inserted or no power applied
MX8 docked and power applied.
It means ....
Battery pack not inserted or no power applied
Battery pack fully charged
Battery pack charging
Battery pack temperature out of range
Battery pack fault or failure
The Status is . . . Comment
Power Fail Replace the main battery with a fully charged main battery.
Or
Connect the MX8 to external AC power to allow the internal char-
ger to charge the main battery e.g., dock in a powered cradle.
Main Battery Low Low Battery Warning. Replace the main battery with a fully
charged main battery. Or dock the MX8 in a powered cradle.
Display Off No user intervention required.
Good No user intervention required.