Installing A Root Ca Certificate; Generating A User Certificate - Honeywell MX8 User Manual

Installing a Root CA Certificate

Note: This section is used only if the Windows certificate store is used. If the certificate store is not used, copy the certificate
to the \System folder or other path specified in the Summit Certs global parameter.
1. Copy the certificate file to the MX8. The certificate file has a .CER extension. Locate the file and tap it.
2. A certificate installation warning is displayed.
3. Tap More.
4. Tap Install to continue the installation. An installation successful message is displayed.
5. You can view any installed user certificates by selecting Start > Settings > System and tapping the Certificates icon.
Installed root certificates are displayed on the Root tab.

Generating a User Certificate

The easiest way to get the user certificate is to use the browser on a PC to navigate to the Certificate Authority. To request
the user certificate, open a browser to http://<CA IP address>/certsrv.
Sign into the CA with the username and password of the person who will be logging into the mobile device.
6. This process saves a user certificate file. There is no separate private key file as used on Windows CE devices.
10 - 37