Honeywell MX8 User Manual page 136

Message
Enter AppLockEnumWin-
dows
Enter DecryptPwd
Enter EncryptPwd
Enter FullScreenMode
Enter GetAppInfo
Enter password dialog
Enter password timeout
Enter restart app timer
Enter TaskbarScreenMode Entering the function that switches the screen to non-full screen mode and
Enter ToAdmin
Enter ToUser
Enter verify password
Exit AppLockEnumWin-
dows-Found
Exit AppLockEnumWin-
dows-Not found
Exit DecryptPwd
Exit EncryptPwd
Exit FullScreenMode
Exit GetAppInfo
Exit password dialog
Exit password dialog-can-
cel
Exit password dialog-OK
Exit password timeout
Exit restart app timer
Exit TaskbarScreenMode
Exit ToAdmin
Exit ToUser
Exit ToUser-Registry read
failure
Exit verify password-no
pwd set
Exit verify password-re-
sponse from dialog
6 - 14
Explanation and/or corrective action
In order for AppLock to control the application being locked so it can pre-
vent the application from exiting, AppLock launches the application and
has to wait until it has created and initialized its main window. This mes-
sage is logged when the function that waits for the application initialization
is entered.
Entering the password decryption process.
Entering the password encryption processing.
Entering the function that switches the screen mode. In full screen mode,
the taskbar is hidden and disabled.
Processing is at the beginning of the function that retrieves the application
information from the registry.
Entering the password dialog processing.
Entering the password timeout processing.
Some application shut down before AppLock can stop it. In these cases,
AppLock gets notification of the exit. When the notification is received, Ap-
pLock starts a timer to restart the application. This message logs that the
timer has expired and the processing is at the beginning of the timer func-
tion.
enable the taskbar.
Entering the function that handles a mode switch into admin mode.
Entering the function that handles the mode switch to user mode
Entering the password verification processing.
There are two exit paths from the enumeration function. This message de-
notes the enumeration function found the application.
There are two exit paths from the enumeration function. This message de-
notes the enumeration function did not find the application.
Exiting password decryption processing.
Exiting password encryption processing.
Exiting the function that switches the screen to full screen.
Processing is at the end of the function that retrieved the application infor-
mation from the registry.
Exiting password prompt processing.
Exiting password prompt w/cancel.
Exiting password prompt successfully.
Exiting password timeout processing.
Processing is at the end of the timer function
Exiting the function that switches the screen mode back to normal opera-
tion for the administrator.
Exiting the function that handles the mode switch into admin mode.
Exiting the user mode switch function.
The AppName value does not exist in the registry so user mode cannot be
entered.
Exiting password verification.
Exiting password verification.
Level
LOG_EX
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING