Display; Display Backlight Timer; Status Leds; System Status Led - Honeywell MX8 User Manual

Display

The touch screen display is an active color LCD unit capable of supporting VGA graphics modes. Display size is 240 x 320
pixels in portrait orientation. The covering is designed to resist stains. The touch screen allows signature capture and touch
input. A pen stylus is included. The touch screen responds to an actuation force (touch) of 4 oz. of pressure (or greater).
The color display is optimized for indoor lighting. The display appears black when the device is in Suspend Mode or when
both batteries have expired and the unit is Off.

Display Backlight Timer

When the Backlight timer expires the display backlight is turned off. The default value for the battery power timer is 3
seconds. The default value for the external power timer is "never" and the checkbox is blank.
The backlight timer dims the backlight on the touch screen at the end of the specified time.
When the display wakes up, the Backlight timer begins the countdown again.
The keypad backlight can be synchronized with the display backlight activity.

Status LEDs

The MX8 does not have a Bluetooth managed LED. Any Bluetooth activity indicators are located in the Desktop taskbar.

System Status LED

The System Status LED is located at the top left of the keypad, above the Scan button.
LED
System Status

Scan Status LED

Color - Activity Indicates ...
Red - Blinking Power fail. Replace the main battery with a fully charged main battery.
Or
Connect the MX8 to external AC power then replace the main battery
with a fully charged main battery.
Red - Steady Main Battery Low. If the main battery is not replaced with a fully charged
battery before the main battery fails, the MX8 is turned Off.
Green - Blinking Display Off. No user intervention required.
No Color Status is good. No user intervention required.
3 - 5