Lock; Password - Honeywell MX8 User Manual

Lock

Start > Settings > Personal > Lock

Password

Set the lock / unlock behavior of the MX8.
Setting
Prompt if device unused for
Timer
Password type
Password
Confirm
Prompt if device is unused for – Check/enable the checkbox and set the inactivity timeout before the MX8 locks. Then
the screen displays a numeric keypad or the input panel depending on the type of password selected.
Once a password has been entered, the password must be used to access the Lock panels again.
Select the Password type, Simple PIN (numeric) or strong alphanumeric. Enter the desired password and confirm.
Note that Windows Mobile places restrictions on what it considers a valid password. If the chosen password is not
strong enough, a warning is displayed and a new password should be entered and confirmed.
Default
Unchecked
0 minutes
Simple PIN
blank
blank
5 - 19