Working With Certificates; Installing A Certificate Via Microsoft Edge; Installing A Certificate Via Email; Installing A Certificate Via Mdm - Honeywell Dolphin 75E User Manual

5. Select Save.
To delete a VPN profile:
1. In the Apps list, touch Settings
2. Touch the name of the VPN profile you want to delete.
3. Select either Properties or Remove.
4. Edit the profile information and select save.

Working with Certificates

The Windows 10 IoT Mobile Enterprise allows you to install digital certificates for secure client communications with websites
and services via three methods: Microsoft Edge, email or mobile device management (MDM). Once a certificate is installed, it
can be used when setting up your VPN profiles, Wi-Fi and email accounts. A certificate can only be removed by resetting the
terminal.

Installing a Certificate via Microsoft Edge

Some certificates are posted and made available for download through a device-accessible URL.
1. Type the URL in the Microsoft Edge address bar.
2. Select the certificate, it opens on the 75e.
3. When prompted, select to install the certificate.

Installing a Certificate via email

The Windows 10 IoT Mobile Enterprise certificate installer supports .cer, .p7b, .pem, and .pfx files.
1. Open the email that has the encrypted certificate file attached.
2. Save the file to the 75e.
3. Select the file to open it and choose install.
4. Enter any security information (e.g., password, user name) required.

Installing a Certificate via MDM

Administrators can use MDM software to add root and CA certificates or configure the terminal to enroll a client certificate
with an enrollment server that supports Simple Certificate Enrollment Protocol (SCEP) used for certificate based client
authentication (e.g., Wi-Fi, VPN, email). Contact your Mobile Device Management (MDM) supplier for further assistance.
To learn more about using MDM solutions with Windows 10 IoT Mobile Enterprise, go to the following Microsoft support
Web sites:
• https://technet.microsoft.com
• https://technet.microsoft.com/en-us/windows/mt631179
• https://technet.microsoft.com/en-us/itpro/windows/manage/windows-10-mobile-and-mdm

Removing Certificates

A Factory Reset (Clean Boot) is required to remove a certificate installed on the terminal. To learn how to perform a Factory
Reset, see Resetting the Terminal

Ethernet Communication

See Establishing Ethernet Communication
6 - 6
> Network & Wireless > VPN.
on page 1-12.
on page 9-6.