Olivetti d-Color MF551 Network Administrator's Manual page 253

2.59 Settings under "Store Address"
Item
Erase
Compose (Date/Time)
Compose (Page)
Compose (Head-
er/Footer)
Compose (Stamp)
Stamp Composition
Limiting Access to Des-
tinations
Registering a "No Destination" entry
Item
No
Name
Resolution
File Type
File Name
Scan Setting
Subject
Text
Simplex/Duplex
Original Type
Color
Separate Scan
Density
d-Color MF651/551
Description
Select whether to erase frames.
Using the frame erase function enables you to erase unwanted areas around
the original, such as transmission information printed on received faxes and
the shadows of punched holes.
Specify whether to print the date and time data.
To print the date and time data, configure the date type, time type, print posi-
tion, fine-tune, color, pages, size, and text type settings.
Select whether to print page numbers.
To print page numbers, configure the starting page number, starting chapter
number, page number type, print position, fine-tune, color, size, and text type
settings.
Specify whether to print the header and footer.
To print the header and footer, specify the registration number of the header
and footer.
Click [Confirm Registered Contents] to view the registered headers and foot-
ers.
Select whether to print the stamp.
To print the stamp, configure the stamp type (preset stamp or registered
stamp), print position, fine-tune, color, pages, and size settings.
Click [Confirm Registered Contents] to check the registered stamp. To specify
the registered stamp, you must register the stamp with this machine in ad-
vance.
Select the combine method for combining elements using "Compose" func-
tions.
You can select whether to insert the element as an image or text.
Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
Description
Displays the registration number.
Enter the destination name (up to 24 characters).
Select the resolution used for scanning the original.
Select the file type for saving scanned data.
Enter the file name (up to 30 characters).
Select whether to save the whole scanned pages in one file, or to divide a file
into specified number of pages when saving the data.
To use the Page Separation function, enter the number of pages for each file.
If the number of original pages is less than the setting of Page Separation, the
original is saved as one file without being separated.
Specify the subject of the E-mail message.
If you select "Not Specified", the default subject is used. Click [Subject List] to
view the content.
Specify the boxy text of the E-mail message.
If you select "Not Specified", the default body text is used. Click [Text List] to
view the content.
Select whether to scan one side or both sides of the original.
You can scan one side of the first page of the original, and then scan both
sides of the remaining pages.
Select the original quality, such as text or photo.
Select a color mode. The file formats for saving data may be limited according
to the color mode you select.
Select whether to divide the original to scan.
Select the density.
2
2-235