Printing (Lpr/Port9100); Tcp/Ip Settings; Lpd Setting; Raw Port Number - Olivetti d-Color MF551 Network Administrator's Manual

2
2.24

Printing (LPR/Port9100)

Configure settings for LPR or Port9100 printing.
LPR printing is performed via the network using the LPR protocol. It is mainly used in UNIX-based operating
systems.
Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine
connected to the TCP/IP network as a destination printer.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.

LPD Setting

d
Reference
For details on how to install the printer driver, refer to the "User's Guide [Print Operations]".
2.24.1

TCP/IP Settings

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-7.
2.24.2 LPD Setting
In the administrator mode of Web Connection, select "Network" ö "TCP/IP Setting" ö "TCP/IP Setting".
Item
LPD
2.24.3

RAW Port Number

In the administrator mode of Web Connection, select "Network" ö "TCP/IP Setting" ö "TCP/IP Setting".
Item
RAW Port Number
Reference
- If you select [OK] after changing multiple port numbers together in Web Connection or on the control
panel, a port number duplication error may be displayed. When this error is displayed, first change one
port number and select [OK]. Then change another one and select [OK].
2-90
(1)
Description
Select "Enable".
Description
Select the check box of the required port, and enter the
RAW port number.
TCP/IP Settings
(1) LPR printing
(2) Port9100 printing
Finish
Printing (LPR/Port9100)
(2)
RAW Port Number
Prior check
Prior check
d-Color MF651/551
2.24