Olivetti d-Color MF551 Network Administrator's Manual page 243

2.59 Settings under "Store Address"
Item
Compose (Stamp)
Stamp Composition
Limiting Access to Des-
tinations
Registering "FTP destinations"
Item
No
Name
Destination Information
Resolution
File Type
File Name
Scan Setting
Simplex/Duplex
Original Type
Color
Separate Scan
Density
Background Removal
Scan Size
Application Setting
E-mail Notification
Original Direction
2-Sided Binding Direc-
tion
Special Original
d-Color MF651/551
Description
Select whether to print the stamp.
To print the stamp, configure the stamp type (preset stamp or registered
stamp), print position, fine-tune, color, pages, and size settings.
Click [Confirm Registered Contents] to check the registered stamp. To specify
the registered stamp, you must register the stamp with this machine in ad-
vance.
Select the combine method for combining elements using "Compose" func-
tions.
You can select whether to insert the element as an image or text.
Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
Description
Displays the registration number.
Enter the destination name (up to 24 characters).
Specify the destination.
Select "Select from Address Book" or "Direct Input", and specify the FTP des-
tination.
Select the resolution used for scanning the original.
Select the file type for saving scanned data.
Enter the file name (up to 30 characters).
Select whether to save the whole scanned pages in one file, or to divide a file
into specified number of pages when saving the data.
To use the Page Separation function, enter the number of pages for each file.
If the number of original pages is less than the setting of Page Separation, the
original is saved as one file without being separated.
Select whether to scan one side or both sides of the original.
You can scan one side of the first page of the original, and then scan both
sides of the remaining pages.
Select the original quality, such as text or photo.
Select a color mode. The file formats for saving data may be limited according
to the color mode you select.
Select whether to divide the original to scan.
Select the density.
Adjust the density of the background.
Select the paper size of the original.
If you select Standard Size, select the size and the feed direction.
If you select Custom Size, specify the height and width.
Click [Display] to display the current application setting.
Specify whether to notify via E-mail the destination URL defined for saving
scanned data.
To notify the URL, specify the notification addresses. You can select the ad-
dresses from the list by clicking [Search from List].
Select the orientation of the original.
Select the binding position of the original.
If the original being sent is a mixed original (original with mixed page sizes), a
Z-folded original (original folded in a zigzag shape), or a long original, select
whichever is relevant.
2
2-225