2.37
Reporting the status of this machine (by E-mail)
Item
Notification ad-
dress
Replenish Paper
Tray
JAM
PM Call
Replace Staples
Replenish Toner
Finisher Tray Full
Service Call
Job Finished
Hole-Punch Scrap
Box Full
Waste Toner Box
Full
Imaging Unit Yield
Fusing Unit Yield
Transfer Belt Unit
Yield
2.37.4
SMTP over SSL/Start TLS
Configure the settings for SMTP over SSL or Start TLS.
For details, refer to page 2-44.
2.37.5
SMTP Authentication
Configure SMTP authentication settings.
For details, refer to page 2-46.
2.37.6
POP before SMTP
Configure the settings for POP before SMTP.
For details, refer to page 2-46.
2.37.7
POP over SSL
Configure the settings for POP over SSL.
For details, refer to page 2-48.
2.37.8
APOP Authentication
Configure APOP authentication settings.
For details, refer to page 2-49.
d-Color MF651/551
Description
Enter the destination E-mail address.
Sends a notification when the paper tray is empty.
Sends a notification when a page has been jammed.
Sends a notification when the periodical inspection is re-
quired.
Sends a notification when there are no staples remaining.
Sends a notification when the toner is empty.
Sends a notification when the capacity of the finisher tray
has been exceeded.
Sends a notification when a service call has occurred.
Sends a notification when the job has finished.
Sends a notification when you need to empty the punch
scrap box.
Sends a notification when the waste toner box needs to be
replaced.
Sends a notification when the imaging unit (IU) needs to
be replaced.
Sends a notification when the fusing unit needs to be re-
placed.
Sends a notification when the transfer belt needs to be re-
placed.
2
Prior check
Notification address
2-119