Table of Contents
Advertisement
: Only for TK-C1530U/E and TK-C1531EG
Introduction
Name of Parts and their Functions (continued)
[RX TERM-OFF,ON/INT,LL] Function Selector Switch
[RX TERM-OFF,ON] RX Signal Terminal ON/OFF Switch
This sets whether or not the signal between RX+
control signal connection terminals
110K resistance.
ON
: Terminated at 110K.
OFF
: Not terminated at 110K.
If the system including the camera is the MULTIDROP (Multi DROP, RS-485)
system, only the last camera mounted along the control signal cable is set to
ON and the other cameras are set to OFF . (In the case of the
MULTIDROP system, it is necessary to set the MACHINE ID.)
If the system including the camera is the P TO P (Point to Point, RS-422A)
system, set this switch of all the cameras to ON . To switch between
communication systems, use the item STYLE on the COMMUNICATION
screen. (A Pg. 51)
(Default setting: ON)
[NT,LL] Selector Switch for Synchronizing System
This switch sets the synchronizing system for the camera.
INT
: This is set for internal synchronization (INT).
LL (Line Lock)
: This is set to synchronize the camera's vertical
synchronization to the power frequency.
(Default setting: INT)
[POWER] Power indicator lamp
This lamp lights up when power is supplied to the camera.
Mounting Screw for Fall Prevention Wire
Use this screw when mounting the fall prevention wire to this unit. (Fall
prevention wire is not supplied with this product.)
Note:
● Connect the fall prevention wire to prevent this unit from falling accidentally.
AC 220 V-240 V power cord
This connects the camera to a commercial AC 220 V-240 V socket.
16
and RX-
from the
should be terminated at the value of
: Only for TK-C1530U/E and TK-C1531EG
Setup
System Example
Power
Cable
Camera 1
Control Signal
MACHINE ID : 1
(MENU screen)
RX TERM : OFF
(Switch)
Camera 2
MACHINE ID : 2
(MENU screen)
RX TERM : OFF
(Switch)
Camera 8
MACHINE ID : 8
(MENU screen)
RX TERM : ON
(Switch)
Remote control unit and etc
Memo:
● Turn off the power of devices to be used before connecting the cables.
● Read through the "Instruction Manual" of the devices to be used carefully
before connecting.
● For the types of connecting cables and the distances required, read
Connecting the back panel (A Pg. 22) carefully before connecting.
● Loop connection cannot be made for control signal cables.
TK-C1530U/E : AC24 V or DC12 V
TK-C1531EG : AC220 V-240V
Cable
Video Signal Cable
TO CAMERA
DATA I / O
UNIT
CAMERA
SERIAL-1
SERIAL-2
RX+ RX- TX+ TX-
COM
1
2
3
4
5
6
7
8
COM 9/1 10/2 11/3 12/4 13/5 14/6 15/7 16/8 COM
AUTO
ALARM
COM
SW
COM
VIDEO INPUT
1
2
3
4
5
6
7
8
MONITOR
MONITOR
OUTPUT
OUTPUT
1
2
1 2
3
4
5 6
7
8
1
2
3
4
5
6
7
8
ON
VIDEO OUTPUT
Monitor
17
Advertisement
Table of Contents
