Table of Contents
Advertisement
: Only for TK-C1530U/E and TK-C1531EG
Setting
PRIVATE MASK screen
Item
MASK No.1
This function masks parts of an image in gray display
such that the masked parts will not be shown on the
MASK No.2
screen.
MASK No.3
Select ON and press the SET button. The MASK EDIT
MASK No.4
screen appears and mask settings can be made. Private
mask setting (A Pg. 62)
ON : Private mask is enabled.
OFF : Private mask does not display.
[Default setting: OFF]
50
Functions and settings
: Only for TK-C1530U/E and TK-C1531EG
COMMUNICATION screen
This item sets the control signal connection terminals at the back of the camera.
If the setting is changed, be sure to close the menu screen before switching on
the power again. The screen display when power is switched on differs
according to the setting of this item.
Item
Functions and settings
TYPE
This sets whether the communication with the control
device is bi-directional or unidirectional. Select the setting
according to the device to be connected.
SIMPLEX : Select this to connect an unidirectional
communication control device.
DUPLEX : Select this to connect a bi-directional
communication control device.
[Default setting: DUPLEX]
STYLE
This sets a communication system. Select the setting
according to the system used.
P TO P (Point to Point)
:This is set when a remote control unit controls a camera.
MULTIDROP
:This is set when a remote control unit controls multiple
cameras.
[Default setting: P TO P]
MACHINE ID
This is set when the STYLE item is set to MULTIDROP .
This number identifies individual cameras in a group. This
item does not operate properly if an ID number is repeated
within a system.
When used in combination with RM-P2580E, set the item
together with the VIDEO INPUT number of RM-P2580E.
When STYLE item is set to P TO P, - - - will be displayed
and settings is disabled.
[Setting: 1 to 99]
Screen display when power is switched on
Monitor screen
PROTOCOL : DUPLEX
ID-05
TYPE display Only displayed when the
STYLE item is MULTIDROP
Memo:
● Only the following 4 types are
displayed.
● DUPLEX
● DUPLEX ID-TT
● SIMPLEX
● SIMPLEX ID-TT
(TT indicates that MACHINE
ID setting is required)
51
Advertisement
Table of Contents
