Table of Contents
Advertisement
TITLE/VIDEO screen (continued)
Item
Functions and settings
B&W/COLOR
(continued)
AUTO
When the MODE item is set to AUTO , this function sets
LEVEL
the signal level of the object where the camera will switch
to B&W mode.
LOW
: Switches to B&W mode when the signal level
of the object indicates low illumination.
NORMAL: Switches to B&W mode when the signal level
of the object indicates normal illumination.
HIGH
: Switches to B&W mode when the signal level
of the object indicates high illumination.
[Default setting: NORMAL]
ZDisplay for TK-C1530U/TK-C925U. For TK-C1530E/
TK-C1531EG/TK-C925E/TK-C926EG, COLOUR is displayed.
Memo:
● When MODE item of B&W/COLOR is set to AUTO ,
- - - will be displayed and settings is disabled.
AUTO
When the MODE item is set to AUTO , this function sets
TIME
the time required to switch to the B&W/Color mode.
Example : When set to 30s, the camera will switch to
B&W mode 30 seconds after it has become
dark.
[Setting: 10s,20s,30s]
[Default setting: 30s]
Memo:
● When MODE item of B&W/COLOR is set to AUTO ,
- - - will be displayed and settings is disabled.
46
: Only for TK-C1530U/E and TK-C1531EG
Item
Functions and settings
B&W/COLOR
(continued)
COLOR
This function gives a pseudo color to the image under
OVERLAY
natural lighting such as moonlight or low brightness light.
(TK-C1530U)
Color reproducibility is poor under artificial illumination
such as infrared lamp and halogen light. In such a case,
COLOUR
select OFF for this function.
OVERLAY
[Setting: OFF, ON]
(TK-C1530E/
[Default setting: OFF]
TK-C1531EG)
Memo:
● Even when the MODE item of AUX FUNCTION is set
to B&W OUT , B&W OUT will not be output when
this item is set to ON . To use B&W OUT signal in
external illumination linkage, set this item to OFF .
(A Pg. 38)
47
Advertisement
Table of Contents
