Security Re-Arm - Mongoose M60i Owner's Operation Manual

M60 series with built-in turbo timer
Hide thumbs Also See for M60i:
Table of Contents

Advertisement

ARMING
Exit the vehicle and close all the doors (& bonnet & boot).
Press button one on the remote control.
The indicators flash once and the siren will chirp once to indicate that the system is armed.
The dash board warning light, LED, will slow flash to indicate the system is armed.
If your vehicle has central locking and it has been connected to this security system, the
doors will lock at the same time as arming.
NOTE: If the engine has automatically immobilised before you had the opportunity to fully arm the
system, press button one twice – once to deactivate the immobiliser and the second time to fully arm
and immobilise the security system.
DISARMING
Press button one on the remote control to disarm the system.
The siren will chirp twice and the indicators will flash twice to indicate disarming.
The doors will unlock if connected to the security system.
If a door is not opened within 30 seconds, the system will automatically re-arm (& re-lock
if connected to your central locking) . See below.
If your remote fails to disarm the security system for any reason, you can disarm the
system by using the PIN override code.
AUTOMATIC SECURITY RE-ARM
The alarm will automatically fully re-arm (and re-lock the doors if connected) if it has been disarmed
by remote but a door has not been opened within 30 seconds. The engine will re-immobilise if the
engine is not started within 30 seconds.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M60bM60gM60sM60gnz

Table of Contents