Emergency Override - Mongoose M60i Owner's Operation Manual

EMERGENCY OVERRIDE

DO NOT LOSE THIS CARD – KEEP IN A SECURE PLACE
Record the PIN on the 'proof of purchase' and in your mobile phone.
The system can be disarmed by entering the unique code
shown on the 'PIN Code Card' issued with this product.
Following is an example using PIN code
Note: If your PIN code contains a "0", this equals '10' flashes.
The code is entered by turning the ignition ON or OFF in sequence with the dash mounted LED.
1) Ignition ON - LED will light permanently to commence override.
2) Ignition OFF - LED will start flashing. Count the number of flashes for the first number.
3) Ignition ON - after 4 flashes (1
4) Ignition OFF - count the number of flashes.
5) Ignition ON - after 5 flashes (2
6) Ignition OFF - count the number of flashes.
7) Ignition ON - after 2 flashes (3
8) Ignition OFF - count the number of flashes.
9) Ignition ON - after 5 flashes (4
10) The system will now disarm and the vehicle can be started.
Should you enter a digit incorrectly, wait for 11 flashes and repeat the procedure from step 1).
4525
st
number of the example). The LED will light.
nd
number).The LED will light.
rd
number). The LED will light.
th
number).
15
MONGOOSE EMERGENCY
4 DIGIT PIN CODE OVERRIDE
PIN CODE:
PLEASE KEEP THIS CARD IN A SAFE PLACE
BUT BE READILY AVAILABLE SHOULD YOU
NEED TO USE THE OVERRIDE PROCEDURE
DO NOT LOSE THIS CARD