How To Copy Group Programs - Sanyo SPW-C0705DZH8 Technical Data Manual

5. Schedule Timer

How to Copy Group Programs

STEP 1 Press the PROG. COPY GROUP button.
"CP-1" starts blinking in the present time display
area and "CP" (copy) starts blinking in the program
STEP 2 Select a source group program to copy.
Select a copy source group using the GROUP
button.
Once having selected the copy source group, press
the SET button to set it.
1
2
STEP 3 Select a copy destination group.
After pressing the SET button, "CP-2" starts blinking
in the present time display area, the copy source
3
group No. set appears in the program
"PA" (paste) starts blinking in the program
to indicate the copy destination.
Select a copy destination group using the GROUP
button.
4
STEP 4 Enter the selected copy destination group.
5
When the SET button is pressed, the number of the
copy destination group appears in the program No.
area.
NOTE
If a group from numbers 1 to 4 was selected as the
6
copy destination group, that number appears in the
program
was selected, that number appears in the program
7
8
area to indicate the copy source.
area. If a group from numbers 5 to 8
area.
area, and
area
3-80
Control of 3-WAY ECO-i SYSTEM