Table of Contents
Advertisement
6. Simplifi ed Remote Controller
Remote controller setting mode
Use the following method to perform simplified remote controller Main/Sub setting and RCU.CK switching.
1.
Press both
and
buttons on the remote controller for more than 4 seconds together.
2.
Use
/
(
) button to select an item code, and then use
3.
Change DATA with
/
4.
Press
. Finally, press
*
To go back one step, press
* DATA is memorized in the RCU.
(DATA setting will not be changed even when the power is turned off.)
* Make sure to set [Normal] for RCU. CK.
Indoor unit setting mode
Use the following method to switch sensor or temperature unit (Celsius/Fahrenheit).
1.
Press
+
+
buttons on the remote controller for more than 4 seconds together.
2.
Use
/
(
) button to select a unit, and then use
3.
Use
/
(
) button to select an item code, and then use
4.
Change DATA with
/
5.
Press
. Finally, press
*
To go back one step, press
* DATA is memorized in the indoor unit.
(DATA setting will not be changed even when the power is turned off.)
To display the sensor temperature:
1.
Press both
and
buttons on the remote controller for more than 4 seconds together.
2.
Use
/
(
) button to select a unit, and then use
3.
Change the sensor address (CODE No.) with
4.
Press the
button to finish service mode.
*
To go back one step, press
To display the trouble history:
1.
Press both
and
buttons on the remote controller for more than 4 seconds together.
2.
Change the alarm message:
3.
Press the
button to finish service mode.
*
To clear the trouble history, press
(
) buttons.
.
.
(
) buttons.
.
.
/
.
/
(
) buttons
.
3-101
button to confirm.
CODE
ITEM
ITEM
RCU. Main/Sub
RCU. CK
button to confirm.
button to confirm.
ITEM
CODE
Room temperature sensor
Temperature unit
button to confirm.
(
) buttons.
CODE No.
(New)
Control of 3-WAY ECO-i SYSTEM
DATA
Main
Sub
RCU. CK
Normal
DATA
Main unit
RCU
o
o
C
F
(Old)
1
2
3
4
5
6
7
8
- Quick Links:
- Technical Data
- Outdoor Unit
Hide quick links:
Advertisement
Table of Contents
