Setting Errors; If Program Times Are The Same - Sanyo SPW-C0705DZH8 Technical Data Manual

5. Schedule Timer

Setting Errors

If time is set as shown below while setting up a program, "ERROR" is displayed (the
Therefore, correct the time setting.

If Program Times are the Same

STEP 1 Every time the SET button is pressed, the setting mode switches between programmed operations of
the same time setting (
STEP 2 Change the time setting with the HH and MM buttons so that the times are no longer the same.
1
STEP 3 Press the SET button and check "ERROR" is not displayed.
STEP 4 Press the PROGRAM button to end the setting mode.
Example of Time Settings That Do Not Cause Errors
2
The below time settings do not generate an error.
1) When ON and OFF times are staggered
3
4
5
6
7
8
and in the above example), therefore select the time setting to correct.
2) When OFF time is earlier than ON time
3-76
Control of 3-WAY ECO-i SYSTEM
indication blinks).