Setting The - Sanyo KMS0912 Instruction Manual

1 ) How to set the
present time
2) How to set the
OFF time
( • _7t_t
ROOM SET
TEMP. TEMP.
3) How to set the ON
time
71_1
ROOM SET
TEMp. TEMP.
4) How to set for daily
ON/OFF operation
PM
ROOM SET
TEMP. TEMP.
12
Setting the Timer
(Example) To set to 9:10 p.m.
Operation
1. Press the PROGRAM button three times.
The time indication alone flashes.
2.
Press the HH button until 9 and
displayed.
Press the MM button until 10 is displayed.
The dispiay will automatically stop flashing
symbol after 10 sec.
except for the
(Example) To stop the air conditioner at 11:30 p.m.
Operation
1. Press the PROGRAM button once. The
timer OFF and time indications flash.
2.
Press the HH button until 11 is displayed.
Press the MM button until 30 is displayed.
The display will change automatically back
to show the present time after 10 sec.
3. Set the timer switch(es) to OFF.
4. Press the ON/OFF button to start the air
conditioner.
(Example) To start operation at 7:10.
Operation
1. Press the PROGRAM button twice. The
timer ON and time indications flash.
2.
Press the HH button until 7 and (ÄO are
displayed.
Press the MM button until 10 is displayed.
The display will change automatically back
to show the present time after 10 sec.
3. Set the timer switch(es) to ON.
4. Press the ON/OFF button to start the air
conditioner.
(Example) To start operation at 7:10 and stop the air conditioner at
11:30 p.m.
1. Set the timer ON/OFF times as shown in 2)
and 3).
2. Set the timer switch(es) to PROGRAM.
Press the ON/OFF button to start the air
3.
conditioner.
Indication
flashing
flashing
are
Indication
flashing
flashing
Indication
flashing
flashing
01-352-12