Table of Contents
Advertisement
~HONDA
~
MBS
INSTALLATION
Installation of the
shift
linkage is
the reverse order
of removal.
Install the shift spindle and change pedal.
Tighten the
change pedal bolt to
the
specified
torque.
TORQUE:
8-12
N·m
(0.8-1.2
kg·m,
6-9
ft·lb)
Insert the
roller
pins into holes
in
the shift drum.
Position the drum cam plate on the pins with the
concaves in the plate with the
higher
pins.
Apply
locking
agent to
the
bolt threads and under-
sides of the bolt and install
the
plate with the bolt.
Tighten the bolt
to
the specified
torque.
TORQUE:
8-10
N·m
(0.8-1.2
kg·m,
6-9
ft·lb)
Install
the stopper arm and stopper spring in the
crankcase and tighten the attaching bolt to the
specified torque.
TORQUE:
8-12
N·m
(0.8-1.2
kg-m,
6-9
ft·lb)
Check the
operation
of the shift
linkage.
With the balancer properly timed, install the clutch
(Page 7-9).
Install the right crankcase cover (Page 7-3).
Fill the transmission with the recommended oil up
to
the proper level (Page 2-3).
Date
of Issue: July, 1981
©
HONDA MOTOR CO., LTD.
SHIFT SPINDLE
DRUM CAM PLATE
79
STOPPER
SPRING
CLUTCH/KICKSTARTER/
SHIFT LINKAGE
CHANGE PEDAL
ROLLER
PIN
STOPPER ARM
BOLT
7-15
Advertisement
Table of Contents
Troubleshooting
