Float Level Adjustment; Throttle Valve/Cable Installation - Honda MB5 1982 Shop Manual

~HONDA.
~
MBS
Install the choke (starter) valve.
Install the float valve, float and float pin.
CAUTION
I
Insert the float pin in the arrow direction.
"--' Check the float for operation. Install the float
chamber.
FLOAT LEVEL ADJUSTMENT
Measure the float level with the float tip just con-
tacting the float valve.
FLOAT LEVEL: 13.5
mm
(0.53
in)
±1.0
mm
Replace the float assembly if not within specifica-
tion.
THROTTLE VALVE/CABLE
INSTALLATION
Install the jet needle on the throttle valve and secure
with the cable clip.
Date of Issue: July, 1981
© HONDA MOTOR CO., LTD.
FLOAT PIN
43
FLOAT VALVE
CHOKE
(STARTER VALVE)
CABLE
CLIP
JET
NEEDLE
FUEL SYSTEM
FLOAT
FLOAT GAUGE
Standard position :
2nd groove
4-7