Jets/Float Valve/Float Assembly - Honda MB5 1982 Shop Manual

FUEL SYSTEM
Blow open all jets and body openings with com-
pressed air.
CAUTION
Never use compressed air to clean the body
when the float assembly is installed. This
could damage the floats.
Check each part for wear or damage.
Inspect the choke (starter) valve.
The knob should
be
held securely when pulled out
fully.
JETS/FLOAT VALVE/FLOAT ASSEMBLY
Install the needle jet, needle jet holder and main jet.
Install the air and stop screws by turning them into
their original positions.
4-6
THREADS
KN
~HONDA
~
MB5
MAIN JET NEEDLE JET HOLDER NEEDLE JET
STOP SCREW
AIR SCREW
Date of Issue: July, 1981
42
© HONDA MOTOR CO., L TO.