Cylinder Head Removal; Cylinder Head Inspection; Cylinder Head Decarbonizing - Honda MB5 1982 Shop Manual

CYLINDER HEAD/CYLINDER/
PISTON
CYLINDER HEAD
REMOVAL
Remove the cylinder head hanger bolt.
Remove the spark plug cap.
Remove the four flange nuts attaching the cylinder
head to the cylinder.
INSPECTION
Check the cylinder head for warpage with a straight
edge and feeler gauge in the directions shown.
SERVICE LIMIT: 0.10 mm (0.004 in)
DECARBONIZING
Remove the carbon deposits from the combustion
chamber.
Clean the head gasket surface of any gasket mate-
rial.
NOTE
I
Avoid damaging the gasket surfaces.
6-2
56
r::iJ\HON'DA.
~
MB5
SPARK PLUG CAP
Date of Issue: July, 1981
©
HONDA MOTOR CO., LTD.