Table of Contents
Advertisement
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FRONT WHEEL/SUSPENSION
Remove the handlebar upper holders and hand-
lebar.
INSTALLATION
Apply grease to the throttle grip sliding surface.
Align the locating pin on the right
handlebar
switch
with the hole
in
the handlebar and
install the
switch.
Tighten the upper screw first, then tighten the lower
screw.
Place the handlebar onto
the
lower holder by
aligning the punch mark with the upper face of
the
lower holder.
Place the upper
holders
on the handlebar with the
punch marks facing the
front.
Tighten the forward bolts first, then tighten the rear
bolts.
TORQUE: 8-12 N-m (0.8-12 kg-m, 6-9
ft-lb)
10-6
106
~HONDA
~
MB5
LOCATING PIN
Date
of
Issue:
July, 1981
©
HONDA MOTOR CO.,
LTD.
Advertisement
Table of Contents
Troubleshooting
