Table of Contents
Advertisement
CLUTCH/K
ICKSTART
ER/
SHIFT LINKAGE
Install the right crankcase cover on the crankcase.
Install the clutch cable bracket and tighten with the
flange bolt.
NOTE
Tighten the bolts in a crisscross pattern and in
two or three steps.
Connect the
tachometer
and clutch cables.
Install the kickstarter pedal.
Fill the transmission with recommended oil (Page
2-3).
Adjust the clutch lever free play (Page
3-1
0).
CLUTCH/
IDLER GEAR
CLUTCH RE MOVAL
Remove the right crankcase cover (Page 7-2).
Remove the clutch lifter plate and clutch springs
by removing the bolts.
7 -4
68
~ HONDA
~
MBS
RIGHT CRANKCASE COVER
LIFTER PLATE
Date of Issue: July, 1981
©
HONDA MOTOR CO., LTD.
Advertisement
Table of Contents
Troubleshooting
