Service Mode 7 (Lbp Service Mode) - Panasonic UF-585 Service Manual

Panasonic UF-585 / 595
5.7

Service Mode 7 (LBP Service Mode)

This Service Mode is used to change printer parameters and verify printer information.
Use the following procedure to change printer parameter.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "7".
5 1) Press "START" for printer parameter settings.
2) Press "2" and "START" to get the printer information.
Ex: Enter "START" for printer parameter settings.
6 Press "3" and "START".
Then enter the number of pages.
Ex: Enter "50" and press "START".
7 Press "\/" or "/\" to select another Parameter Name (See Table)
or press "CLEAR" to return to step 4.
6 Repeat step 5 through 7 to request operation, or press "STOP" twice to
return to standby.
Sub-Code
1 1
2
3
2 \//\
\//\
\//\
174
Operation or Unit Condition
Parameter Name
Printer Counter Displays and resets the printer and cassette(s) counters.
LBP Fuser Reset Clears the LBP fuser error.
Out of Toner Sets the number of pages to print after low toner is detected.
LBP ROM Version Shows the LBP ROM Version.
LBP Print Available Shows the remaining number of allowable printable pages after low
toner has been detected (Counter Only).
LBP MEMORY CAPACITY Shows the page memory capacity.
LCD Display
MAR-12-1999 15:00
SET MODE
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
LP SERVICE MODE (1-2)
1:LBP PARAMETER SET
LBP PARAMETER SET
1.PRINTER COUNTER
LBP PARAMETER SET
3.OUT OF TONER
LP SERVICE MODE (1-2)
1.LBP PARAMETER SET
MAR-12-1999 15:00
Description
00%
(1-6)
00%