Periodic Maintenance Check List - Panasonic UF-585 Service Manual

3.3

Periodic Maintenance Check List

The chart outlined below is a general guideline for maintenance. The example list is for an average usage of 50 transmitted and
received documents per day. Needless to say, the environmental conditions and actual use will vary these factors.
The chart below is for reference only.
Parts Description
Printer Motor (626)
Toner Cartridge
Paper Feed Roller (518)(911) 12 months or 10,000 documents
Feed Roller (526) (904)
Receiver Unit
Bias Transfer Roller (604)
Fuser Unit (701)
Fuser Roller (709)
Pressure Roller (706)
Roller Shaft 2 (235)
Feed Pinch Roller (236)
* Shaft Hole
ADF Roller (331)
Separation Rubber (207)
Transmitter Unit Feed Roller (302)
Eject Roller (303)
Scanning Glass (308)
Mirrors (334, 335, 336)
Transmit Motor (324)
"x" Stamp Head (325)
Note:
The number of pages is based on the ITU-T Image No. 1 test chart at Multi-Copy mode.
Operation environment 20
-
-
12 months or 10,000 documents
12 months or 10,000 documents
When replacing Print Cartridge
When the Recording Paper wraps
itself around the roller.
When the Recording Paper wraps
itself around the roller.
30,000 documents
30,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
-
-
°C,
50%RH.
Maintenance, Adjustments and Check Points
Cleaning
Cycle Method
-
Page 34
Page 44
Page 47
Cleaning chart 50,000 documents
Page 39
Page 39
Page 24
Page 24
Page 26
Page 23
Page 26
Page 26
Page 26
Page 31
Replacement / Adjustment
Cycle Method
100,000 documents Page 36
approx 7,500 pages
(See Note)
30,000 documents Page 34
-
30,000 documents Page 47
Page 38
(Included as part of Page 39
the Fuser Unit)
(Included as part of Page 39
the Fuser Unit)
-
-
30,000 documents Page 31
30,000 documents Page 23
30,000 documents Page 32
30,000 documents Page 28
-
-
100,000 documents Page 30
5,000 documents Page 27
53