Power; Environment; Construction - Panasonic UF-585 Service Manual

Panasonic UF-585 / 595
6. Printing Speed
5 ppm (12 seconds/page)
7. Fuser Warm Up Time
Within 30 seconds after turning the power on.
8. Document Tray Capacity
100 sheets
1.6

Power

1. Power Requirement
99~140 VAC, 47~63Hz, Single Phase
2. Power Consumption
Standby (Sleep Mode: On)
Standby (Power Save Mode: On)
Standby (Power Save Mode: Off)
[Room temperature: 77°F (25°C)]
Transmission
Reception
Copy
Max
1.7

Environment

1. Operating Environment
Temperature
Relative Humidity
Tilt
2. Storage Environment (Carton Box Condition)
Temperature
Relative Humidity
Note
The machine should be stored upright.
3. Transportation Environment (Max. 480 hours, Carton Box Condition)
Temperature
Relative Humidity
1.8

Construction

Dimensions (W x D x H)
Weight (excluding paper)
12
[Room Temperature: 68 to 95°F (20 to 35°C)]
[Power Voltage: Minimum 115 VAC]
UF-585
: Approx. Less than 0.7 W/H
: Approx. 6.0 W/H
: Approx. 21 W/H
: Approx. 16 W
: Approx. 450 W
: Approx. 450 W
: Approx. 470 W
: 50 to 95°F (10 to 35°C)
: 15 to 70% RH
: The unit must be kept on an even, level surface.
: -4 to 104°F (-20 to 40°C)
: 5 to 85% RH
: -4 to 122°F (-20 to 50°C)
: 15 to 85% RH
14.6 x 16.3 x 9.8 in (370 x 413 x 250 mm)
Approximately 19 lb (8.5 Kg)
UF-595
←
Approx. 7.0 W/H
Approx. 23 W/H
Approx. 17 W
←
←
←