Panasonic UF-585 Service Manual page 247

No. Parameter
34 ENERGY SAVER MODE
35 DAYLIGHT TIME
36 RING PATTERN
DETECT (DRD)
(See Note 2)
37 RCV TO MEMORY
38 ACCESS CODE
40 RELAY XMT REQUEST
42 CONF. POLLED FILE
SAVE
43 PASSWORD-XMT
44 PASSWORD-RCV
46 SELECT RCV
47 REMOTE RECEPTION
52 DIAGNOSTIC
PASSWORD
53 SUB-ADDRESS
PASSWORD
Continued on the next page.
Setting
Setting
Number
To reduce the power consumption in standby, select either Energy-
Saver or Sleep mode and specify the Delay Time (1 to 120
1 Off
minutes) for the machine to enter into the selected mode.
The Delay Timer setting is only available in the Energy-Saver or
Sleep Modes.
Off :
2 Energy-Saver
Energy-Saver Mode :Saves energy by consuming less power than
Sleep Mode :
*3 Sleep
1 Invalid Selecting whether the clock adjusts for Daylight Saving Time
automatically. The built-in clock will advance 1 hour at 2:00 am on
the first Sunday in April and fallback 1 hour at 2:00 am on the last
*2 Valid
Sunday in October.
*1 Invalid All ring patterns.
Select a ring pattern for automatic answering.
1: A
2: B
2 Valid
3: C
4: D
Enter a 4-digit password used to print out the received document
in memory by using F8-5 (RCV TO MEMORY). When F8-5 is set
(----)
to On, this parameter will not be shown on the LCD display. (See
page 92 of the User's Guide)
Enter a 4-digit Access Code to secure the machine from
(----)
unauthorized use. (See page 90 of the User's Guide)
*1 Invalid Selecting whether the machine accepts and performs Relay XMT
Request. (See page 115 of the User's Guide)
2 Valid
*1 Invalid Selecting whether the machine saves the confidential polled file
even after the file is polled once.
2 Valid
*1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the receiving
2 On
station when transmitting. (See page 101 of the User's Guide)
*1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
2 On
transmitting station when receiving. (See page 102 of the
User's Guide)
*1 Invalid Selecting whether the machine performs selective reception. (See
page 99 of the User's Guide)
2 Valid
1 Invalid Selecting whether or not the machine accepts remote reception
command. (See page 63
*2 Valid
Setting the password for Remote Diagnostic Mode. Please ask
(----)
your Panasonic Authorized Dealer for details.
Setting a 20-digit password for secured sub-address
(----)
communication.
Comments
The unit will remain in standby mode and
consume more energy than when in Energy-
Saver or Sleep modes.
when in standby mode by turning off the
fuser unit after the specified time.
This is the lowest power state that the
machine enters after the specified time
without actually turning off.
Standard ring pattern.
Double ring pattern.
Triple ring pattern (Short-Short-Long).
All other triple ring pattern, except the type C
described above.
of the User's Guide)
Installation
259