Panasonic UF-585 Service Manual page 157

5.3.5 Protocol Trace
Prints a Protocol Trace Report for the previous communication.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "3".
5 Press "6" and "START".
6 After printing is completed, the unit returns to the display in step 3.
7 Press "STOP" to return to standby.
Operation or Unit Condition
*************** PROTOCOL LOG REPORT ****************** DATE MAR-12-1999 ***** TIME 16:56 ***P.01
STATUS : OK
MODE : ECM-TX (STANDARD)
SPEED : 9600bps 00MS/L
REMOTE CAPA. : DIS 00 CE B9 C4 80 12
LOCAL CAPA. : TSI 2B 20 20 20 38 37 2B 2B 2B 2B
39 38 36 36 35 34 37 38 38 30
DCS 00 C6 F8 44
COMMAND LOG.
REMOTE : NSF CSI DIS
LOCAL :
------------------------------------------------------------------
REMOTE : MCF
LOCAL : DCN
************************************ -PANAFAX UF-595- ***********-12345678901234567890-******
MAR-12-1999
SET MODE
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
PRINTOUT (1-7)
1:FUNC. PARAM. LIST
* PRINTING *
PROTOCOL TRACE
SERVICE MODE
ENTER NO. OR
MAR-12-1999
CFR
TSI DCS PIX PPS-EOP
-PANASONIC-
Service Modes
LCD Display
15:00
00%
(1-6)
15:00
00%
163