Panasonic UF-585 / 595
2.17 Rear Chassis (505), PRTA PC Board (536), SNS1 PC Board (615)
(3)
(2)
(7)x5
(8)
(10)
42
(5)
(6)
(6)
(6)
(9)
(9)
(9)
(11)
(12)
(1) Remove the Fuser Unit (701) (Refer to 2.15).
(2) 1 Screw (19).
(3) Remove the Memory Card Ground Plate (516).
(4) Remove the Parallel Port I/F Cover (113), Left and Right
Printer I/F Brackets (405, 406) (Refer to 2.14).
(5) Disconnect Connector CN25 on the LCU PC Board (402).
(6) Disconnect Connector CN6 on the SCA/SCB PC Board
(422).
(7) 5 Screws (19).
(8) Remove the Rear Chassis (505) Assembly.
(9) Disconnect SCA/SCB-PRTA Flat Cables (421) on the
PRTA PC Board (536).
(10) Release the Latch Hooks and remove the Printer I/F PCB
Guide (532) Assembly.
(11) 2 Screws (19).
(12) Remove the PRTA PC Board (536).