7.13. LCD SECTION
The Gate Array (IC301) works only for writing the ASCII code from the data bus (D4~D7). V0 is
supplied for the crystal drive.
R303, R305, and R306 are density control resistors.
Consequently, in this unit, the timing (positive clock) is generated by the LCD interface circuitry
in the gate array (IC301).
DIsplay mode
2 lines (X1. 0)
X1. 5
7.14. POWER SUPPLY BOARD SECTION
Density
LED1 (IC301-22pin)
XLD15 (IC301-21pin)
LED1
XLD15
192
Normal
Darker
H
L
L
L
H
H
Hi-Z
L