Troubleshooting Guide - Sartorius IB 16000 S Installation And Operating Instructions Manual

Troubleshooting Guide

Problem ...
No segments are indicated in the
weight display (9)
Weight display shows "L" or
"CH2"
Weight display shows "H"
The weight readout changes
constantly or the special message
"BUSY" does not go out in the
weight display
The weight display shows "CE"
The code "CC" in the display does
not go out
The weight readout is obviously
wrong
"POWER OFF"
blinks in the display
24
Causes ...
No line voltage available
-
- The AC adapter is not plugged
in
- The platform cover (1) is not in
place
- An object is pressed against
the platform cover or has
gotten underneath it
Load exceeds the capacity of
-
the scale
- Unstable ambient conditions
Too much vibration or there is
-
a draft
Sample does not have a stable
-
weight
- A zero readout was not
indicated in the weight display
when the CAL key (11) was
pressed to calibrate
The scale is loaded
-
The CAL key (7) has not been
-
pressed when the display read
zero
- The scale is loaded
- Scale has not been calibrated
Scale has not been tared
-
before weighing
- The air bubble of the level
indicator (2) is not within the
circle(only for IB 16000 S)
- The operating voltage is too
loo
(battery discharged)
Remedy
Check power supply
-
- Plug in the AC adapter
-
Place platform cover on the
-
scale base
- The platform cover must rest
properly on the scale base
without any interfering objects
in between
- Unload the scale
- Set up scale in another area
Access the menu to adapt
-
scale to the particular type of
weighing environment
- Press tare control (9) and re-
press the CAL key
Press the tare control (6) and
-
re-press the CAL key
- Unload the scale
- Calibrate scale
Tare before weighing
-
- Level scale
- Connect the scale or the
external rechargeable battery
to line voltage using the AC
adapter