Interrupt Mode
This mode enables you to interrupt the current job or a reserved job to make priority
copies. This mode is useful if you need to make a rush copy during a long copy job.
NOTE
•
You can make interrupt copies whenever the machine is ready to scan.
•
To cancel the Interrupt mode, press [Interrupt].
•
To cancel previously set copy modes, press
canceled.)
1
Press [Interrupt].
If you want to make copies after changing the Department ID while Department
ID Management is enabled, press
password using
Settings," in the
NOTE
The current job does not stop printing immediately after you press [Interrupt].
Printing of the current job stops only when the actual printing of the priority or
interrupt copy starts.
2
Place your originals ➞ set the desired copy modes.
3
Press
-
(numeric keys). (See Chapter 6, "System Manager
Reference Guide
.)
(Start).
(Reset). (The Interrupt mode itself is not
(Log In/Out) ➞ enter the Department ID and
Interrupt Mode
1
1-29