Canon Color imageRUNNER C3480 Manual page 49

7
Select the desired paper size.
If the following screen is displayed, adjust the width of the slide guides ➞ specify
the paper size ➞ press [OK].
If the following screen is displayed, adjust the width of the slide guides to match
the paper size stored in Stack Bypass Standard Settings, or set Stack Bypass
Standard Settings to 'Off' in Common Settings (from the Additional Functions
screen). (See Chapter 4, "Customizing Settings," in the
IMPORTANT
Set the paper size to the same size as the paper loaded in the stack bypass.
● If you want to select a standard paper size:
❑
Select the desired paper size ➞ press [Next].
NOTE
To select an A or B series paper size, press [A/B-size].
❑
Select the desired paper type ➞ press [OK].
If you want to adjust the thickness of the toner applied to the paper, press
[Plain Ppr Print Set.]. If too much toner is being applied to the paper, press
[Thin]. If not enough toner is being applied to the paper, press [Heavy].
If the desired paper type is not displayed, press [Detailed Settings] ➞ select
the paper type from the list ➞ press [OK].
If you are copying onto the back side of a previously printed sheet, press [2nd
Side of 2-Sided Page].
Reference Guide
.)
1-27
Reserved Copying
1